First of all gas prices suck ***.

I'm currently using a P28 chipped with one of KATMANs old FFS.1.DOHC ECU programs from back in the day. This program is a little too much for my car right now, and I'm running quite rich. I don't feel like burning excess gas with these prices, and want to have a milder setup.

Since the ECU is already chipped and socketed, I'm wondering if there is any possibility of finding a CHIP that is very similar to a stock B16A P30 ECU or even P73 ITR specs??? Im looking for a 5,500 RPM VTEC crossover and an 8,500 RPM rev limit.

If it is possible to find a chip that acts like a stock VTEC ECU, what is the process of taking out the chip I have and putting the new one in the socket?

Where is Katman when you need him?

I figure that this will be cheaper/easier than tracking down a whole new ECU and paying $150-$250.

PLEASE HELP!!!!!!!!!!!!!

 

check the sponsor section, there are a few guys that can set you up with a good program, pm or email rocket, he should be able to hook you up

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PURPLETERROR aka BIGMATT &raquo;</TD></TR><TR><TD CLASS="quote">check the sponsor section, there are a few guys that can set you up with a good program, pm or email rocket, he should be able to hook you up</TD></TR></TABLE>

WORD. Thanks.

PS: RAVEN loves the cack.

 

Pm replied

 

Bump for help &lt;&lt;-----

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mtber &raquo;</TD></TR><TR><TD CLASS="quote">Pm replied </TD></TR></TABLE>
H-T is actually good for something