stripped crank at flywheel bolt
09-10-2003, 02:11 PM
#1
Junior Member
Thread Starter
Join Date: Nov 2001
Location: San Diego
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
stripped crank at flywheel bolt
One of the flywheel bolts on my b16 is stripped due to the flywheel coming loose 
Just the first two threads of the crank. Should i retap it or just run a die down to clean it up? Anyone know the size of the flywheel bolts?
Just the first two threads of the crank. Should i retap it or just run a die down to clean it up? Anyone know the size of the flywheel bolts?
09-10-2003, 02:51 PM
#2
Senior Member
Re: stripped crank at flywheel bolt (MisterB)
if it's only the first two threads, then I would re-tap it to the same thread pattern, shouldn't be too hard. if the BOLT is stripped then I would replace it with a new one.
09-10-2003, 10:01 PM
#3
Junior Member
Thread Starter
Join Date: Nov 2001
Location: San Diego
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
Re: stripped crank at flywheel bolt (poison)
a few of the bolts are messed up so i will replace those.
what size are the bolts or should i just take one down when i get the tap?
what size are the bolts or should i just take one down when i get the tap?
09-10-2003, 11:24 PM
#4
99-0104
Join Date: Feb 2003
Location: Socal
Posts: 6,509
Likes: 0
Received 0 Likes
on
0 Posts
Re: stripped crank at flywheel bolt (MisterB)
i also agree with the above post just use a tap to trace the threads and try to torque the bolts if they have side to side play in them or you cant torque them to spec you will probally need a new crank 
also replace the bolts that were the problem
also replace the bolts that were the problem
Thread
Thread Starter
Forum
Replies
Last Post
