No luck doing a search, so here goes what seems like a stupid question.

I have a S-afc on my Integra 96LS. Eventually for a turbo buildup, but until money is there I have it on some 440's I wired in.

Setting it up, I selected "pressure" as the sensor type. Then it has TWO numbers to set, "in" and "out". The manual only lists ONE number for the car "6". Using "6" for both "in" and "out" causes the engine to stall.

So... what values do I use for the "in" and "out" settings?

 

06/06

and cylinders=4 with an arrow point up and to the right like this /

4/