Rev?
I've checked all of these things and the problem still exist. I checked the ecu and it is not throwing any codes. I appreciate all of the info you guys have given me so far. Any other suggestions?
reset your idle, using the adjusting screw on the TB. then reset your ECU. the problem is that it's getting too much air, and the EAVC can't compensate, so it searches for the correct idle speed (750rpm) by opening and closing. be sure to reset your ECU afterwards.
Same type of problem happend to me. Go over all of your vacume lines very carefully. There is most likely a leak somewhere and just resetting the ecu won't do anything for it.
Trending Topics
reset your idle, using the adjusting screw on the TB. then reset your ECU. the problem is that it's getting too much air, and the EAVC can't compensate, so it searches for the correct idle speed (750rpm) by opening and closing. be sure to reset your ECU afterwards.
[Modified by ZC_CRX, 2:26 PM 8/24/2002]
Thread
Thread Starter
Forum
Replies
Last Post
91dxhatch
Honda CRX / EF Civic (1988 - 1991)
2
Jan 4, 2007 11:46 AM



