Question (with new bearings in motor)???????

Reply Subscribe

Thread Tools

Search this Thread

Oct 31, 2002 | 03:13 PM

TeAm IllUsIonZ978

Thread Starter

Joined: Oct 2002

Posts: 89

Likes: 0

From: 978, ma, United state

Question (with new bearings in motor)???????

Okay here goes when you have a motor with new bearings like the first few oil changes will you very fine(tiny)particales of metel from the bearings ?(all new bearing in the block )???

Oct 31, 2002 | 05:19 PM

aeolus

Honda-Tech Member

Joined: Jan 2002

Posts: 1,296

Likes: 0

From: So., CA, usa

Re: Question (with new bearings in motor)??????? (TeAm IllUsIonZ978)

if you can really see then with your eyes,then something is wrong

Oct 31, 2002 | 05:22 PM

TeAm IllUsIonZ978

Thread Starter

Joined: Oct 2002

Posts: 89

Likes: 0

From: 978, ma, United state

Re: Question (aeolus)

it not really visable but if you look really hard or feel the oil (like rub around)you can feel it a little......

Oct 31, 2002 | 05:52 PM

earl

Honda-Tech Member

Joined: Jun 2001

Posts: 8,120

Likes: 3

From: Irvine, CA, usa

Re: Question (TeAm IllUsIonZ978)

Probably more likely to be left over particles not flushed from the block from the previous machine work. Got to cleam them well after they come from the machine shop