Pipe Thread Size of MSD Inline Fuel Pump
Joined: Sep 2002
Posts: 552
Likes: 0
From: So. Cal
Re: Pipe Thread Size of MSD Inline Fuel Pump (NateTEG95)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NateTEG95 »</TD></TR><TR><TD CLASS="quote">Is it just me, or use the inlet fitting that comes on the MSD too big?</TD></TR></TABLE>
yea, i had a hard time w/ that side. what i ended up doing, i took off the brass fitting that comes on that side. i replaced it with an earl's fitting which i then connected to an earl's elbow, which connected to a stainless steel braided line, which connected to an earl's banjo fitting, directly to the fuel filter... took awhile to figure this setup out and $50 bucks later, but it's alot cleaner than trying to fit the factory hose end to the inlet.
yea, i had a hard time w/ that side. what i ended up doing, i took off the brass fitting that comes on that side. i replaced it with an earl's fitting which i then connected to an earl's elbow, which connected to a stainless steel braided line, which connected to an earl's banjo fitting, directly to the fuel filter... took awhile to figure this setup out and $50 bucks later, but it's alot cleaner than trying to fit the factory hose end to the inlet.
Thread
Thread Starter
Forum
Replies
Last Post
sushibug
Forced Induction
2
Apr 14, 2002 12:16 AM
