P30 ECU,What vtec crossover are you using?
Thread Starter
Joined: Jan 2003
Posts: 122
Likes: 0
P30 ECU,What vtec crossover are you using?
I own a ls/vtec with a b16 head and b18b block running on a P30 ecu. I am trying to configure my vtec crossover on my vafc.
What should I set my Low to High cam rpm's at?
What should I set my High to Low cam rpm's at?
Thanks
What should I set my Low to High cam rpm's at?
What should I set my High to Low cam rpm's at?
Thanks
Honda-Tech Member
Joined: Mar 2002
Posts: 657
Likes: 0
From: Denmark
Re: P30 ECU,What vtec crossover are you using? (Wong Wonder)
You need to go to a dyno and find out man..That's the only way..VTEC is at 5000 on my chip now thanks to some dyno tuning..
Set it to 3000 rpm and do a run..Then to 7000 and do another run..Set VTEC to the point where the torque curves cross..
Set it to 3000 rpm and do a run..Then to 7000 and do another run..Set VTEC to the point where the torque curves cross..
Thread
Thread Starter
Forum
Replies
Last Post
