Can someone please point to a site which has ODB 0 to I conversion? I've done a search on this site and didn't find much.

Thanks,
-S

 

That canversion is going to be treaky. You are going to have to mount sensors on the block and change your O2 sensor.

 

Call Payn Tech they have the stuff to do it . COM" TARGET="_blank">www.PAYNTECHNOLGIES.COM


[Modified by LOtownNateB, 6:00 PM 12/29/2002]

 

Well, I've got a 1st gen B16. I want to run Hondata after I boost so I am considering conversion to ODBI. I know Hondata can do ODB0 PR3, but that ECU needs two O2s and I'd have to run open loop all the time... that's not going to work well for me because I actually want to drive the car on the street.

Asides from the harness and a new distributor, I am curious what addition wiring might need to be done.

Thanks,
-S

 

Call Payn Tech and ask for Matt or Tom. they will get you set up with a forward date harness and hondata . Payn Technologies # 248-362-0283

 

go to

http://www.urbanimports.org, talk to jesse he makes a conversion kit

 

We have a kit that includes a new OBDI distributor, the forward date harness, and a 4-wire O2. You will have to do a little bit of wiring, but it is well worth it.

We are one of the largest Hondata dealers in the country.

Give Matt or Myself a call and we can get you the components and technical assistance to make the conversion and smooth as possible.

Thanks,

Tom

 

Thanks Tom. I'll get in touch with you guys.

-S

 

How do you guys handle the ELD? Do you also need to get a new alternator that the ECU controls, or does that even give a CEL code if it is not connected?

I did the conversion already, but for the AEM EMS, so the ELD issue was nil.

 

PM to Blown90Hatch. Usually the EF forum is a good forum to post this question, but do a search on HT and you will find lots of info

 

Hondata will allow you to disable the ELD.


Tom

 

that would be nice !! cause got a USDM ELD in my 95 (E)SI (euro model)
and always have a error code for ELD .. not that is dones not run right !! but just annying knowin it is there...