LS/VTEC reversed to install on b18c block?
Thread Starter
Honda-Tech Member
Joined: Nov 2004
Posts: 2,145
Likes: 0
From: Central MA, USA
LS/VTEC reversed to install on b18c block?
Im about to buy a type R head thats allready been tapped and setup for LS/Vtec is it possible to reverse the setup so i can use the head on my GSR motor?
How would i do so?
How would i do so?
Mad Scientist
Joined: Nov 2002
Posts: 5,827
Likes: 1
From: tallafizzy, FL state
Re: LS/VTEC reversed to install on b18c block? (B18BlackEK)
well, if the oil passage has a plug on it, then just take it out.
if its welded, then either drill or run an external oil line like
if its welded, then either drill or run an external oil line like
Mad Scientist
Joined: Nov 2002
Posts: 5,827
Likes: 1
From: tallafizzy, FL state
Re: LS/VTEC reversed to install on b18c block? (B18BlackEK)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18BlackEK »</TD></TR><TR><TD CLASS="quote">what i meant was i want the type R head for my GSR block but how do i reverse the tap?</TD></TR></TABLE>
reverse tap?
all you have to do is take out the plug out of the vtec feed oil gallery.
reverse tap?
all you have to do is take out the plug out of the vtec feed oil gallery.
Honda-Tech Member
Joined: Mar 2003
Posts: 300
Likes: 0
From: Lafayette, LA
Re: LS/VTEC reversed to install on b18c block? (mmuller)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mmuller »</TD></TR><TR><TD CLASS="quote">
reverse tap?
all you have to do is take out the plug out of the vtec feed oil gallery.
</TD></TR></TABLE>
NO, I think what you're not getting is he's undoing the ls/vtec.
Yes you can, just take the tap out of the hole and put the plug back in. If it's welded then just cap it off. If the dowl pins are drilled then you'll need the ls/vtec pins and use the upside down.
reverse tap?
all you have to do is take out the plug out of the vtec feed oil gallery.
</TD></TR></TABLE>
NO, I think what you're not getting is he's undoing the ls/vtec.
Yes you can, just take the tap out of the hole and put the plug back in. If it's welded then just cap it off. If the dowl pins are drilled then you'll need the ls/vtec pins and use the upside down.
Mad Scientist
Joined: Nov 2002
Posts: 5,827
Likes: 1
From: tallafizzy, FL state
Re: LS/VTEC reversed to install on b18c block? (Naterror)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Naterror »</TD></TR><TR><TD CLASS="quote">
NO, I think what you're not getting is he's undoing the ls/vtec.
Yes you can, just take the tap out of the hole and put the plug back in. If it's welded then just cap it off. If the dowl pins are drilled then you'll need the ls/vtec pins and use the upside down.</TD></TR></TABLE>
OK, i was talking about the stock vtec feed oil gallery wich you have to plug when doing ls/v .if you want to reverse take out the plug...
I think your mistaken thinking is the adapter that you put on the head to connect the oil line. you do have to plug that back.
MMMK?
NO, I think what you're not getting is he's undoing the ls/vtec.
Yes you can, just take the tap out of the hole and put the plug back in. If it's welded then just cap it off. If the dowl pins are drilled then you'll need the ls/vtec pins and use the upside down.</TD></TR></TABLE>
OK, i was talking about the stock vtec feed oil gallery wich you have to plug when doing ls/v .if you want to reverse take out the plug...
I think your mistaken thinking is the adapter that you put on the head to connect the oil line. you do have to plug that back.
MMMK?
Thread
Thread Starter
Forum
Replies
Last Post
SLow-Side
Honda Civic / Del Sol (1992 - 2000)
4
Nov 21, 2004 03:14 PM
