can anyone help me with my problem?
i built an ls vtec motor containing a 96 gsr head
and a 94 ls block. my idling is too high. i don't know what to do.
i don't have check engine lights on my car. it idles at 2000 rpm.
the car runs fine except for the idling. please help

 

have you checked for vaccum leaks?throttle cable too tight?

 

yes, i check for vacuum leaks and the throttle body.

 

what is the code that you are getting

 

no codes

 

make sure you have coolant flowing to the iacv,

if that no work, adjust the idle screw on the throttle body with a flat head screwdriver

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SkRiBLaH &raquo;</TD></TR><TR><TD CLASS="quote">adjust the idle screw on the throttle body with a flat head screwdriver</TD></TR></TABLE>

 

I had a similar problem on my ls/vtec. My problem was, i took my throttle body off and cleaned it. Then I went to a Honda dealership for the TB gasket but when I put it on my car started idling at like 2 grand. So I sprayed carbruetor cleaner all around the TB and found out that it was sucking air. So I took the TB back off and went to a different dealer and they told me that I had the wrong gasket. So I changed the gasket and problem went away. So if you have not checked the you might want to.

 

I'll try that, thanks