Tech / Misc Tech topics that don't seem to go elsewhere.
Sponsored by:
Sponsored by:

I need help!!!

Thread Tools
 
Search this Thread
 
Old Aug 13, 2005 | 10:59 AM
  #1  
1bar_ek's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Nov 2004
Posts: 1,491
Likes: 1
Default I need help!!!

I just recently changed my turbo. Went from the t3/to4b to the t3/to4e turbo. After changing the turbo, and turning on the engine, I realized a lot of smoke coming out from my exhaust system. I revved my car a few times, and some oil starts to shoot out.

Anybody know what's wrong??!!??

By the way, engine has been rebuilt, and only has 500 miles on it.
Reply
Old Aug 13, 2005 | 10:49 PM
  #2  
New2528's Avatar
Junior Member
 
Joined: Jun 2005
Posts: 17
Likes: 0
Default

If you didn't anything else to the motor, than the turbo oil seal is probably Bad.
Reply
Old Aug 14, 2005 | 12:00 AM
  #3  
SOHCmaster's Avatar
Junior Member
 
Joined: Feb 2005
Posts: 713
Likes: 0
From: colorado springs, colorado, USA
Default

sounds like a bad turbo swap.
Reply
Old Aug 14, 2005 | 09:22 AM
  #4  
1bar_ek's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Nov 2004
Posts: 1,491
Likes: 1
Default Re: (New2528)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by New2528 &raquo;</TD></TR><TR><TD CLASS="quote">If you didn't anything else to the motor, than the turbo oil seal is probably Bad.</TD></TR></TABLE>

Would I need to get the turbine shaft seal then, or the compressor seal, or both??




Modified by darkside_ek at 6:16 PM 8/15/2005
Reply
Old Aug 15, 2005 | 11:21 AM
  #5  
New2528's Avatar
Junior Member
 
Joined: Jun 2005
Posts: 17
Likes: 0
Default

If you are going to rebuild it just change both. It not worth it try to safe a couple of buck for the seal..
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
oh_dam
Forced Induction
11
Jun 20, 2010 11:21 AM
luly-rast
Forced Induction
7
May 3, 2006 12:08 PM
1bar_ek
Honda Civic / Del Sol (1992 - 2000)
6
Aug 13, 2005 03:47 PM
Novtecdohc
Forced Induction
5
Jul 30, 2005 12:22 PM
MisterB
Forced Induction
1
Nov 7, 2001 05:13 PM




All times are GMT -8. The time now is 02:59 PM.