new to honda-tech. got a project going on, im rebuilding a h23a1 that i got for swapping a h22a in my boys lude. I thought he just spun a bearing, but i tore the rest of the block down yesterday and the retard snapped the crank in two!! my plan is to get like a 98 civic ex shell and drop it in there. who knows all the wiring steps, shifter box conversion, and is there any other mounts and halfshafts that will work besides expensive *** hasport. I've de pinned my boys hardess before on his crx harness and plugged the pins to the right spots for his ecu. and had to re wire in the engine bay. in need to know all the wiring specs withought getting a pre wired harness so i can do it all my self. save money, ya know!!