Factory chipped PR4....?

Reply Subscribe

Thread Tools

Search this Thread

Jul 13, 2006 | 03:49 PM

slambedcivic

Thread Starter

Honda-Tech Member

Joined: Dec 2002

Posts: 3,823

Likes: 0

From: Harbeson, De, USA

Factory chipped PR4....?

I just opened up a PR4 to socket it. Low and behold there is a factory chip, resistor, jumper and caps where i would normally put there.... any ideas on this? Is this normal?

Modified by slambedcivic at 8:01 PM 7/13/2006

Jul 13, 2006 | 04:06 PM

mmuller

Mad Scientist

Joined: Nov 2002

Posts: 5,827

Likes: 1

From: tallafizzy, FL state

Re: Factory chipped PR4....? (slambedcivic)

yep, some ecu's came with an external eeprom, like the p61

Jul 13, 2006 | 04:15 PM

slambedcivic

Thread Starter

Honda-Tech Member

Joined: Dec 2002

Posts: 3,823

Likes: 0

From: Harbeson, De, USA

Re: Factory chipped PR4....? (mmuller)

does this mean that its something special, or is it just a stock integra map?

Jul 13, 2006 | 04:20 PM

mmuller

Mad Scientist

Joined: Nov 2002

Posts: 5,827

Likes: 1

From: tallafizzy, FL state

Re: Factory chipped PR4....? (slambedcivic)

dos the chip have a copper colored sticker on top?

OMG if so you have a supa richard simmons map!!!!!! they work SUPER!!!

j/k normal map

Jul 13, 2006 | 04:42 PM

slambedcivic

Thread Starter

Honda-Tech Member

Joined: Dec 2002

Posts: 3,823

Likes: 0

From: Harbeson, De, USA

Re: Factory chipped PR4....? (mmuller)

yes it does have a copper colored sticker on top. will i still be able to desoldier this chip and socket it? and can i use that chip as a basemap in the new socket.... providing its all cleaned up and what not