WonSun

Was thinking about going K Series in my ek hatch but I want to pass emissions with the scan port. I know how to pass emissions with a B series engine I just don't know how to pass with a K series engine and that's my whole problem. I know you need a sub harness to power up the body of car but can you scan a k-Pro

1999 Civic Si

I do know that Kpro can be scanned via the OBD2 port and pass emissions, several people local to me do this with no issues. However these are in cars that came stock with a k series, so I am not sure how that would work in a swapped car, assuming the harness used in the swap gives power to the OBD2 port you should be good to go.

Edit:
You can also pass on flashpro as well, incase anyone was wondering that.

tony_2018

Should be the same if they are accessing the obd2 port, Do you have a bluetooth obd2 scanner, pretty cheap

Eyeless6

I just recently tried this, had a problem with communication so it couldn't read the data