I am running an LS/VTEC (b18b/b18c) with the compression about 11.5 to 1. I have about 3,000 miles on the car. I ran a compression test and I had 220 across the cylinders (they were witihin five psi of one another) Does this seem a little low or am I spot on?

I have crower stage two cams
SRP Pistions over sized by +0.20
AEM intake
DC headers
World Sport exhaust
The intake manifold has been ported.
the head has been milled
(I will be adding a complete list of parts later)

thanks

 

sounds good. usually you look for a 10% difference from the lowest to the highest figure. its highly unlikely that all cylinders will have a leak of the same amount if that is what you are worried about.