CODE 21 and CODE 22
Thread Starter
Joined: Jan 2005
Posts: 7
Likes: 0
From: spring valley, ny, rockland
CODE 21 and CODE 22
Well guys when i stay under 5.2 grand i get code 21 that is the V Tec Spool Solenoid valve but when i go over 5.2 grand i get code 22 V tec pressure valve do u think i should just get a new solenoid and **** cause i am sick of doin of this crap 2 try and just get v tec on a single cam but i want v tec. I Need HElP badly so can some one HELP PLEASE PLEASE holla at ur boy boy
HT Order of Merit
Joined: Aug 2004
Posts: 6,966
Likes: 3
From: Connecticut
Re: CODE 21 and CODE 22 (jdm stan)
holla at your boy?
Retard.
Check your oil level, if you dont have enough oil you will get those codes. Otherwise check the wiring going to the solenoid and to the pressure sensor, make sure they are ok. Last thing would be to replace the sensor.
Retard.
Check your oil level, if you dont have enough oil you will get those codes. Otherwise check the wiring going to the solenoid and to the pressure sensor, make sure they are ok. Last thing would be to replace the sensor.
Thread Starter
Joined: Jan 2005
Posts: 7
Likes: 0
From: spring valley, ny, rockland
Re: CODE 21 and CODE 22 (JDM_Ej)
yea the oil level is good and all the wires r hook up right. Should i just buy a new switch r just change the whole solenoid lol yea holla at boy boy means give me a response aww i can't explain it.
Thread
Thread Starter
Forum
Replies
Last Post
Fuster_Cluck
Tech / Misc
6
May 15, 2003 10:05 AM
