OK ive got a 98 integra just swapped OBD2 H22 in, the h22 doesnt have a CKF sensor on the oil pump....im running an OBD1 ecu, do i need to do anything about the sensor? or am i fine without it?

 

if the ecu doesnt look for that sensor then u will be fine

 

awesome, thanks....im runnin a stock obd1 P13 now with a chipped p28 on the way so i should be fine

thanks again

 

That sensor is strictly for obd2 misfire detection. There is no disabling it on any ecu unless you connect the wires to the distributor (obd2 reasons). But if you have an obd1 ecu, then the sensor doesnt exist