CEL codes 20,13??DSM injector install.
Thread Starter
Joined: Jan 2006
Posts: 28
Likes: 0
From: Calgary, Canada
CEL codes 20,13??DSM injector install.
I threw those 2 codes today, and then only thing I can think of that is different than before is I just installed some DSM 450's with inline resistors.
I installed all four inline resistors(green wire wrapped 10ohm 10Watt) on the yellow and black wires to the injectors.
Car starts up within a few cranks and idles really nicely (thanks to mapped chip)
But I know that the cause of the codes are from my resistors...any help on this?
I installed all four inline resistors(green wire wrapped 10ohm 10Watt) on the yellow and black wires to the injectors.
Car starts up within a few cranks and idles really nicely (thanks to mapped chip)
But I know that the cause of the codes are from my resistors...any help on this?
Thread Starter
Joined: Jan 2006
Posts: 28
Likes: 0
From: Calgary, Canada
Re: CEL codes 20,13??DSM injector install. (Gixxerboy02)
Would the possibility of these codes possibly be caused if the chip I got burned with a base tune have the wrong "Map Sensor Installed"....say the chip shows "3" but I am only needing "1"???
Thread
Thread Starter
Forum
Replies
Last Post
