blowing ecu fuse
Thread Starter
Junior Member
Joined: May 2005
Posts: 358
Likes: 0
From: on a chair, Wa
blowing ecu fuse
I keep blowing the ECU fuse in the under hood fuse box. I don't get it! What could cause this?
**Jdm h22a motor. 92 cx hatchback. Should I post this in hybrid??
Could this be why my motor keeps on dying and almost lacks fuel at higher rpms? Thanks!
-Jason
**Jdm h22a motor. 92 cx hatchback. Should I post this in hybrid??
Could this be why my motor keeps on dying and almost lacks fuel at higher rpms? Thanks!
-Jason
Thread Starter
Junior Member
Joined: May 2005
Posts: 358
Likes: 0
From: on a chair, Wa
I wired in a resistor box, but now I'm beginning to wonder if I wired it all wrong! And I didnt mess with the injector clips due to the engine had already been in a eg civic already... I just assumed they were good. Should I take pictures and post them?
-Jason
-Jason
Junior Member
Joined: Dec 2005
Posts: 101
Likes: 0
From: Ridgeland, SC, USA
Re: (Jason-)
a partner of mine just had that same problem about a week ago and come to find out it was a harness wire grounding out on the injectors. he had to trace every wire on his car
Thread Starter
Junior Member
Joined: May 2005
Posts: 358
Likes: 0
From: on a chair, Wa
My resistor box wiring is right. I just opened up the harness and checked. Now I'll check the other wires to make sure they are connected and good.
And this problem didnt happen from the beginning, but just last night... I blew 2 or 3 fuses within a short period of time. It loses fuel and then the car dies... check the fuse and its blown.
-Jason
And this problem didnt happen from the beginning, but just last night... I blew 2 or 3 fuses within a short period of time. It loses fuel and then the car dies... check the fuse and its blown.
-Jason
Honda-Tech Member
Joined: Dec 2000
Posts: 20,006
Likes: 3
From: Tampa, FL
Re: (b16 prospect)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b16 prospect »</TD></TR><TR><TD CLASS="quote">a partner of mine just had that same problem about a week ago and come to find out it was a harness wire grounding out on the injectors. he had to trace every wire on his car</TD></TR></TABLE>
Exactly. I have also seen that if the wires going to the injector clips are switched within all the injectors, this will blow it as well.
Exactly. I have also seen that if the wires going to the injector clips are switched within all the injectors, this will blow it as well.
Trending Topics
Thread Starter
Junior Member
Joined: May 2005
Posts: 358
Likes: 0
From: on a chair, Wa
Re: (jdmhatchness)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmhatchness »</TD></TR><TR><TD CLASS="quote">good luck jason let me know if you get it.</TD></TR></TABLE>
I will. No worries. I hope its nothing SERIOUS! I actually need to get off my *** and look, but Im too tired. lol
-Jason
I will. No worries. I hope its nothing SERIOUS! I actually need to get off my *** and look, but Im too tired. lol
-Jason
Thread
Thread Starter
Forum
Replies
Last Post
boostin b16
Forced Induction
3
Mar 2, 2003 03:03 PM
