just bought the aem wideband from a car that i have seen working in befor
but i hooked it up it has power but when i turn the key to on the guage reads 14.7 then slowly goes higher and higher till it doesnt read anything anymore and when the car is running it doesnt read anything inless i rev the motor and then doesnt read anything again i have it wired to my sterio wich i was told can be done
but if anyone can tell me the way they have theirs hooked up would be much apreciated

 

anyone?

 

lol..... jesus christ. definately read the directions that came with the wideband.

 

with the aem i believe you hook it up to the ignition

 

it never came with anything telling me how to hook up i got it from my friends car and it worked in his car and what is a sterio hooked up to it all ties in to igniton sterio turns on when car turns on meaning i hooked the power to the sterio so when the key turns on the sterio and guage turns on just it wont read any AFRs when car runs or drives

 

http://www.bmotorsports.com/do...s.pdf

 

http://causeforalarm.thecarthi....html