AEM EMS Car misses, leans out, dies and pops ... Lost
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: A Place in, Florida, USA
Posts: 7,277
Likes: 0
Received 0 Likes
on
0 Posts
AEM EMS Car misses, leans out, dies and pops ... Lost
I'm lost. I have had problems here and there with this car since the AEM EMS went in. JWT was in it before. One problem has persisted and has gotten worse. Seems like the longer the car is driven the more prone it is to happen. Happened six times within one hour of retuning partial throttle tonight. Will be driving. Almost seems as if the car misses. Then it starts leaning out. Car dies. And it lean pops. Car starts right back up after. These are the only datalogs I could get. I could probably get more parameters but I dont want to subject the car to this. At this point I am thinking it's either A) the AEM EMS itself or B) the wiring harness. Leaning more towards the AEM EMS. Maybe it was damaged during shipping. If someone, JDogg/Mase/etc, wants the calibration I will e-mail it to them. This is a 2003 Nissan Spec-V with an SR20DE+T with an AEM EMS 30-1600. Thanks in advance.
RIGHT CLICK SAVE TARGET-AS LOG 1
RIGHT CLICK SAVE TARGET-AS LOG 2
RIGHT CLICK SAVE TARGET-AS LOG 1
RIGHT CLICK SAVE TARGET-AS LOG 2
Thread
Thread Starter
Forum
Replies
Last Post
Janz99
Classifieds: Forced Induction
3
07-20-2012 10:00 AM