Carolina Cars Thread!
Honda-Tech Member
Re: (andythomason)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by andythomason »</TD></TR><TR><TD CLASS="quote">some new pics of the whip, i haven't posted in here in forever!
</TD></TR></TABLE>
Looks great dude!
</TD></TR></TABLE>
Looks great dude!
Honda-Tech Member
Join Date: Jun 2005
Location: Greenville, SC
Posts: 1,561
Likes: 0
Received 0 Likes
on
0 Posts
Re: (dohcdelsol93)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcdelsol93 »</TD></TR><TR><TD CLASS="quote">I need an excuse to drink some beer
I need it after that pick up last night. I was tired after the first 3 trips up and down the ice. </TD></TR></TABLE>
man it was awesome. i skated so much my feet froze and i was losing control of them. i really need to practice getting the puck air born ill really accurate just dont have alot of power of air borness
I need it after that pick up last night. I was tired after the first 3 trips up and down the ice. </TD></TR></TABLE>
man it was awesome. i skated so much my feet froze and i was losing control of them. i really need to practice getting the puck air born ill really accurate just dont have alot of power of air borness
Honda-Tech Member
Join Date: Jul 2004
Location: a fuzzy happy place, USA
Posts: 4,337
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RNPoo7)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Coppertop »</TD></TR><TR><TD CLASS="quote">
man it was awesome. i skated so much my feet froze and i was losing control of them. i really need to practice getting the puck air born ill really accurate just dont have alot of power of air borness</TD></TR></TABLE>
who even has the energy to get a puck in the air after a pick up like that. I enjoyed the ice time but I really hope there are a few more people at the one tomorrow night
man it was awesome. i skated so much my feet froze and i was losing control of them. i really need to practice getting the puck air born ill really accurate just dont have alot of power of air borness</TD></TR></TABLE>
who even has the energy to get a puck in the air after a pick up like that. I enjoyed the ice time but I really hope there are a few more people at the one tomorrow night
Honda-Tech Member
Re: (dohcdelsol93)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcdelsol93 »</TD></TR><TR><TD CLASS="quote">I can't til the weather gets warm so I can tape up the garage and re-paint the sol.
</TD></TR></TABLE>
How hard is it to spray little items?
I need to paint my new bumper and dont want to spend a **** load on it.
</TD></TR></TABLE>
How hard is it to spray little items?
I need to paint my new bumper and dont want to spend a **** load on it.
Honda-Tech Member
Re: (Morasso)
paint gun, air compressor, sand paper, cleaner, primer, paint, clear, hardner, drugs, ****, etc....it gets expensive
paint guns are expensive...i don't use anything but gravity fed guns...i hate the other ones...and the gun i shoot with has a digital psi gauge on it...it was about 700 dollars...better to be safe than sorry...if u buy supplies and come to greenville i can spray ur bumper in a booth for you for cheap
paint guns are expensive...i don't use anything but gravity fed guns...i hate the other ones...and the gun i shoot with has a digital psi gauge on it...it was about 700 dollars...better to be safe than sorry...if u buy supplies and come to greenville i can spray ur bumper in a booth for you for cheap
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2004
Location: 'Round Here, SC
Posts: 4,251
Likes: 0
Received 0 Likes
on
0 Posts
Re: (TehMan)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TehMan »</TD></TR><TR><TD CLASS="quote">ian TOLD me the s2s2's slightly put performed the bcs4's and thats why he took them out...i saw the buddyclubs in a box on his toolbox at honda and asked him about them...i'm going by what he TOLD me...so if he gave the the wrong information, sorry travis </TD></TR></TABLE>
Mario, I wasnt jumping your case by any means. Just wondering if, from specs, the m22x and m24 cams were more aggressive than the s2s2. Didnt mean for it to come across the wrong way. My bad. I also posted up the RM info just in case you were interested in seeing the specs of their cams.
Mario, I wasnt jumping your case by any means. Just wondering if, from specs, the m22x and m24 cams were more aggressive than the s2s2. Didnt mean for it to come across the wrong way. My bad. I also posted up the RM info just in case you were interested in seeing the specs of their cams.
Honda-Tech Member
Join Date: Jun 2005
Location: Greenville, SC
Posts: 1,561
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Morasso)
if you just wanna paint this one item and not paint anything else ever then go to macco but if you wanna start painting more stuff i'd say its worth lookin into. go to lowes get a 50 dollar paint gun it works perfectly fine. gravity guns to paint very well and are erginomic on your hand, but with the pressurized one you can paint upside down sand paper is cheap as **** shop around paint is bout 50 bucks a quart for the cheaper paint, and a little bit of clear. ya you need an aircompressor. and if you work on cars you need one anyways so its good to have. then the water seperator for the air lines they can get expensive. all i did was put a refridgerator around the air lines and condensid the water out. painting is a great skill to have, its somewhat easy once you get the rythm down. and a good paint job is in the prep work which will add up on the macco bill alot
Honda-Tech Member
Re: ([Ennis_D])
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by [Ennis_D »</TD></TR><TR><TD CLASS="quote">]
Mario, I wasnt jumping your case by any means. Just wondering if, from specs, the m22x and m24 cams were more aggressive than the s2s2. Didnt mean for it to come across the wrong way. My bad. I also posted up the RM info just in case you were interested in seeing the specs of their cams.</TD></TR></TABLE>
i was replying to the guy...i didn't think u got snappy with me at all man...it's all good
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Coppertop »</TD></TR><TR><TD CLASS="quote">if you just wanna paint this one item and not paint anything else ever then go to macco but if you wanna start painting more stuff i'd say its worth lookin into. go to lowes get a 50 dollar paint gun it works perfectly fine. gravity guns to paint very well and are erginomic on your hand, but with the pressurized one you can paint upside down sand paper is cheap as **** shop around paint is bout 50 bucks a quart for the cheaper paint, and a little bit of clear. ya you need an aircompressor. and if you work on cars you need one anyways so its good to have. then the water seperator for the air lines they can get expensive. all i did was put a refridgerator around the air lines and condensid the water out. painting is a great skill to have, its somewhat easy once you get the rythm down. and a good paint job is in the prep work which will add up on the macco bill alot</TD></TR></TABLE>
he wants the whole car done...i'm getting my guys to do it
Mario, I wasnt jumping your case by any means. Just wondering if, from specs, the m22x and m24 cams were more aggressive than the s2s2. Didnt mean for it to come across the wrong way. My bad. I also posted up the RM info just in case you were interested in seeing the specs of their cams.</TD></TR></TABLE>
i was replying to the guy...i didn't think u got snappy with me at all man...it's all good
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Coppertop »</TD></TR><TR><TD CLASS="quote">if you just wanna paint this one item and not paint anything else ever then go to macco but if you wanna start painting more stuff i'd say its worth lookin into. go to lowes get a 50 dollar paint gun it works perfectly fine. gravity guns to paint very well and are erginomic on your hand, but with the pressurized one you can paint upside down sand paper is cheap as **** shop around paint is bout 50 bucks a quart for the cheaper paint, and a little bit of clear. ya you need an aircompressor. and if you work on cars you need one anyways so its good to have. then the water seperator for the air lines they can get expensive. all i did was put a refridgerator around the air lines and condensid the water out. painting is a great skill to have, its somewhat easy once you get the rythm down. and a good paint job is in the prep work which will add up on the macco bill alot</TD></TR></TABLE>
he wants the whole car done...i'm getting my guys to do it
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2004
Location: 'Round Here, SC
Posts: 4,251
Likes: 0
Received 0 Likes
on
0 Posts
Re: ([Ennis_D])
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RNPoo7 »</TD></TR><TR><TD CLASS="quote">Who's all going to the Clemson-USC baseball game on Sunday?</TD></TR></TABLE>
I can say that myself and Mike will be there along with the guys we play softball with.
Here are the specs of the Skunk2 cams, RM cams, and the Brain Crower cams: (sorry for the sizes. Just wanted to make sure they are readable)
I can say that myself and Mike will be there along with the guys we play softball with.
Here are the specs of the Skunk2 cams, RM cams, and the Brain Crower cams: (sorry for the sizes. Just wanted to make sure they are readable)
Honda-Tech Member
Join Date: Apr 2003
Location: Hidin in a, cave
Posts: 7,160
Likes: 0
Received 0 Likes
on
0 Posts
Do you guys have tickets already or what's the deal?
I don't know if I'm doing yet. If everyone is going, I'll go just to kick it back and relax. But I REALLY hate baseball lol
I don't know if I'm doing yet. If everyone is going, I'll go just to kick it back and relax. But I REALLY hate baseball lol
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2004
Location: 'Round Here, SC
Posts: 4,251
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RNPoo7)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RNPoo7 »</TD></TR><TR><TD CLASS="quote">Do you guys have tickets already or what's the deal?
I don't know if I'm doing yet. If everyone is going, I'll go just to kick it back and relax. But I REALLY hate baseball lol</TD></TR></TABLE>
Nope, do not have tickets. I HOPE we can get tickets there. From what I understand they no longer allow people to stand outside the fence on the 3rd base side nor the outfield to watch the game w/out paying. That means no more taking a cooler full of beer and standing on it to see over the fence and watch the game for nothing but the price of gas and beer. I know there will probably be between 4-10 of us going from the softball team. You should come out and kick it with us. There will be plenty of beer before b/c I think we are going to try and get down there around 10am for a little baseball tailgating
Off to Chemistry until 8:50 Good thing I dont have friday classes
I don't know if I'm doing yet. If everyone is going, I'll go just to kick it back and relax. But I REALLY hate baseball lol</TD></TR></TABLE>
Nope, do not have tickets. I HOPE we can get tickets there. From what I understand they no longer allow people to stand outside the fence on the 3rd base side nor the outfield to watch the game w/out paying. That means no more taking a cooler full of beer and standing on it to see over the fence and watch the game for nothing but the price of gas and beer. I know there will probably be between 4-10 of us going from the softball team. You should come out and kick it with us. There will be plenty of beer before b/c I think we are going to try and get down there around 10am for a little baseball tailgating
Off to Chemistry until 8:50 Good thing I dont have friday classes
Don't call it a comeback
Thread Starter
Join Date: Oct 2001
Location: Greenville SC
Posts: 20,968
Likes: 0
Received 0 Likes
on
0 Posts
Re: ([Ennis_D])
why not run the blox cams travis?
just order something. i think youll be happier trying a cam for yourself rather than listening to opinions. i dont listen to any opinions myself, and im not saying to be likem me, but while people may down D2's you see how mine are. PERFECT.
Whatever you do, enjoy it. If you think of it too much, you will either think yourself out of it or run it into the ground ya know?
I got mad love for you, and just want to see you with something that YOU, not everyone else, will be happy with.
just order something. i think youll be happier trying a cam for yourself rather than listening to opinions. i dont listen to any opinions myself, and im not saying to be likem me, but while people may down D2's you see how mine are. PERFECT.
Whatever you do, enjoy it. If you think of it too much, you will either think yourself out of it or run it into the ground ya know?
I got mad love for you, and just want to see you with something that YOU, not everyone else, will be happy with.
Honda-Tech Member
Honda-Tech Member
Join Date: Jun 2005
Location: Greenville, SC
Posts: 1,561
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Stunna BEN)
don't run cams, go invent some solinoids and valves and run a fully adjustable software wher eyou can change anyone one of the vlaves at any one point in time baller status