I am installing my stock springs back and have a problem
the fork is now so low and no amount of pushing down or up moves it...its stuck




anyone have any ideas?

 

Try using a jack to push up the fork.

 

doesn't help jacks up the whole assembly

 

got it fixed
doesnt' this look a lil bit too low tho?


I do have theo ther side jacked up so that it'd be easier to lower the rotor

 

be happy you got the bolt out of the shock, mine just snapped

 

Have someone push down on the rotor.

 

I would have said use a jack but if it's stuck, try jamming something between the top of the wheel well and the rotor/hub and then carefuly jack it up from the bottom.

 

well I already got it fixed...just took some jumping up and down on it with all my body wieght and a long jack pole to push it along heh

pain in the ***...reason I'm doing this is I stripped the head when installing my rear springs so I want to throw it back to stock for now until spring time hwen I get some shocks then pay the 50 bucks per side to get that rear one fixed by the shop...reason I stripped is stupid me iddn't notice I had a 12pt socket instaed of a 6 pt

 

were you running stock shocks and aftermarket springs before?

 

yes but for a grand total of 20 miles. The car was lowered on just the fronts and I needed to make an emergency errand.

 

and the good news its back to its normal height at taht one side

 

cool