No idea what happened to the connector/plug. If someone could help out here.

After testing with my multimeter, pin 1 and 3 are common. Assume that would be the 12v input. Pin 2 is common with the brass mount. Assume thats the ground.

the instruction sheet says there is only 2 wires. one ground and one power, yet there are three pins. Just want to be sure. TIA.

 

any help out there??

 

you should IM "littlebluecrx" & "xxxracing" here on honda-tech...they have been running that boost controller for some time so they should be able to help you.

for how much did you get that boost controller by the way?

 

Yes, there are only two wires... I have one on my car... I have to double check this tomorrow, but all you have to do is have power to pin 2 and ground to either 1 or 3 because on the plug they supply, it can be installed either up or down.