StreetProjectz

i ripped the plug off the boost sensor wiring, there is 3 wires red, black and white. when looking at the back of the control unit 2 where they are suppose to plug into what order do they pin in to it. ive searched here and the internet any help or picture would be great. ill pay pal the first person who correctly shows me $5. thanks alot

StreetProjectz

lets git r done

Quad-Damag

red is power 12V powersource line
black is ground and white If you want the light to dim with the console, you have to grab the illumination wire from the radio.
http://www.projectwrx.com/modu...id=17

Very easy one to see as well

http://www.defi-shop.com/produ....html

StreetProjectz

i have the bf guage, all i want to know is the order the wires plug into on the back of the control link.

StreetProjectz

someone has to know this please help

StreetProjectz

someone please pull out there defi control link flip it over and just tell me the order the three wires are in that comes out in the turbo spot. thanks

StreetProjectz

help me

InfamousDX

Looking at the back of the control unit as if the plug were plugged in... from left to right it's BLACK > WHITE > RED.