I plan on getting a b20 complete (turned into odb1) w/ 99-00 si tranny into my 92 civic cx hatch....please tell me how much do you think all of my items are going to cost me and total it out...because i dont know the average of what everything goes for...

b20 longblock
99-00 si b16 tranny
motor mounts
gsr shiftlinkage (cus i like the bend )
harness (cus my **** is already fucked up)
ls ecu
ls intake manifold

....anything else i forgot? Please include with price and total it up please. Thank you...this will help me make a decision whether i want to get a b20 then go turbo or just a b16 or so...

Note : 99-00 si tranny for now...while im n/a then when turbo gets on...i go with the ls tranny.

 

yes?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by trooper0641 &raquo;</TD></TR><TR><TD CLASS="quote">
1. b20 longblock
2. 99-00 si b16 tranny
3. motor mounts
4. gsr shiftlinkage (cus i like the bend )
5. harness (cus my **** is already fucked up)
6. ls ecu
7. ls intake manifold

Note : 99-00 si tranny for now...while im n/a then when turbo gets on...i go with the ls tranny. </TD></TR></TABLE>

1. $750 from Hmotorsonline.com
2. $300 or less from the classifieds
3. don't need motor mounts for a B20...the engine comes with all you'll need
4. less than $150 from the classifieds or ebay
5. $200 new
6. $no idea how much non-VTEC ECU's go for
7. $100 MAX because everyone gets rid of them for Edelbrock or Skunk2 manis.

So probably in the neighborhood of $2000 and a case of corona. Not bad.

 

i came up with $2000 average too.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Archidictus &raquo;</TD></TR><TR><TD CLASS="quote">

1. $750 from Hmotorsonline.com
2. $300 or less from the classifieds
3. don't need motor mounts for a B20...the engine comes with all you'll need
4. less than $150 from the classifieds or ebay
5. $200 new
6. $no idea how much non-VTEC ECU's go for
7. $100 MAX because everyone gets rid of them for Edelbrock or Skunk2 manis.

So probably in the neighborhood of $2000 and a case of corona. Not bad.</TD></TR></TABLE>

Thanks guys

 

$300 for a 99-00 si b16 tranny? isnt it around the $600-$800s?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by trooper0641 &raquo;</TD></TR><TR><TD CLASS="quote">$300 for a 99-00 si b16 tranny? isnt it around the $600-$800s?</TD></TR></TABLE>
yeah, I paid 650 shipped for my 00 Si tranny with low miles

 

I dont get it...how do i turn my obdII b20 into a obdI?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by trooper0641 &raquo;</TD></TR><TR><TD CLASS="quote">I dont get it...how do i turn my obdII b20 into a obdI?</TD></TR></TABLE>
jumper harness...

obdII to obdI conversion harness....

check jdmshit.com for there cheap conversion harness, last i checked they were going for 65 or so shipped....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by trooper0641 &raquo;</TD></TR><TR><TD CLASS="quote">
1. b20 longblock
2. 99-00 si b16 tranny
3. motor mounts
4. gsr shiftlinkage (cus i like the bend )
5. harness (cus my **** is already fucked up)
6. ls ecu
7. ls intake manifold
</TD></TR></TABLE>

1. about $700-800. dont forget to add shipping if you cant find it local
2. why not got LS trans now? save you some money but SI trans $600-$700
3. motor mounts should come with motor
4. $150ish
5. which harness? engine? if so about $200
6. no more than $100, not too popular
7. $50 or so, alot of people get rid of them


your looking at $2000 ballpark figure.

good luck on the swap

 

https://honda-tech.com/zerothread?id=788966

not a b20 but a bassiclly brand new ls motor with a gsr tranny i know if you bought the whole swap he'd sell it to you for 3750

 

I opened up this thread and was expecting an already estimated price of a B20. I thought you were excited about getting a B20 for cheap and that's why you started this thread.

I say $2000 like everyone else.

 

I got a quote from a junkyard for $2500 for a B20Z (30k miles) longblock with a LS dropout minus the long block. I was wondering if that is a good price? That is shipped to me and everything.

 

for a complee swap in a eg what do u need any thing and evry thing ? also what are the hp # on them and 1/4 mile times?