help please
Thread Starter
Honda-Tech Member
Joined: Nov 2003
Posts: 250
Likes: 0
From: frm dA bAy
help please
i need help badly. i just installed 450s/smc setting is 40% from idle/4000 and 35% 5000to8000. its idle badly then dies out. i installed everything correctly. currently running 5 psi
Joined: Aug 2002
Posts: 2,509
Likes: 0
From: Ft.Lauderdale, Florida, USA
Re: help please (turboz6)
if ur talking about AFC settings im hopping you mean -40% and not 40%. if you do mean 40% try going the other way and set them at -35% for idle and it will run perfect
Member
Joined: Jun 2002
Posts: 4,448
Likes: 0
From: US
Re: help please (civicflnum1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civicflnum1 »</TD></TR><TR><TD CLASS="quote">if ur talking about AFC settings im hopping you mean -40% and not 40%. if you do mean 40% try going the other way and set them at -35% for idle and it will run perfect</TD></TR></TABLE>
nah hes using an smc, its similar to an afc. Hmm I dont know much about the smc since im running the afc hack. but i found this site awhile back and it may help you
http://userwww.sfsu.edu/~ecg/SMC/smcmain.htm
nah hes using an smc, its similar to an afc. Hmm I dont know much about the smc since im running the afc hack. but i found this site awhile back and it may help you
http://userwww.sfsu.edu/~ecg/SMC/smcmain.htm
Thread
Thread Starter
Forum
Replies
Last Post