Can anyone tell me or link me to websites where i can buy a missing link for my lsvtec turbo for my 95 integra? Post it here and let me see what my options are, thanks

 

you got pm

 

http://www.importparts.com/

 

Why bother they are junk. Look into Jackson racing's MAP sensor clamp or better yet there is the Split Signal clamp for the maps sensor. I had countless issues relying on a mechanical check valve to bleed off boost going to the MAP sensor just so that it would not see boost. Do it electronicly. All you have to do is clamp off the MAP sensor voltage at the voltage that is equivelent to 0 boost and no vacuume. To find this value out just turn the key to the on postion then put a volt meter on the MAP sensor signal wire. With the engine off you are at atmophere pressure (0boost) . Just set the split signal peice to this voltage. You ECU will never see a voltage higher than this setting therefore it will not freak out. You never have to clean this unlike the check valve that gets dirty and sticks. http://www.spitsec.com

 

or they also sell them on http://www.inlinefour.com