turbo for stock b20z engine
Thread Starter
New User
Joined: Jan 2001
Posts: 146
Likes: 0
From: WI, america
turbo for stock b20z engine
ok maybe this forum can help..just wanna know if this motor is good for turbo like the ls engine is..being this motor doesn't have that high of compression ratio..thanks
New User
Joined: Apr 2001
Posts: 693
Likes: 0
From: Bay Area, CA
Re: turbo for stock b20z engine (rACEr_b_O_y_)
B20z: CR 9.6:1 84mm Bore LS Crank/rods
B20b: CR 8.8:1 84mm Bore LS Crank/rods
B18a/b: CR 9.2:1 81mm
B20head is the same as a B18b head except for the intake manifold and 84mm head gasket
Boosting a B20 would be very much like a B18a/b except for the increased torque.
B20 sleeves are stronger also(siamese)
B20b: CR 8.8:1 84mm Bore LS Crank/rods
B18a/b: CR 9.2:1 81mm
B20head is the same as a B18b head except for the intake manifold and 84mm head gasket
Boosting a B20 would be very much like a B18a/b except for the increased torque.
B20 sleeves are stronger also(siamese)
Honda-Tech Member
Joined: Aug 2000
Posts: 2,677
Likes: 0
From: somewhere in, CT, USA
Re: turbo for stock b20z engine (Ray)
i thought the rod to stroke ratio wasnt ideal on the b20? theres a site dedicated to the b20 check that out for loads of info. i think its http://www.b20.com
New User
Joined: Apr 2001
Posts: 693
Likes: 0
From: Bay Area, CA
Re: turbo for stock b20z engine (rACEr_b_O_y_)
thanks..one more question..do you think this motor can take 10 psi of boost or more?
endyn says the block can handle 14psi
Thread
Thread Starter
Forum
Replies
Last Post
