injector OHM and resisitor box question
Thread Starter
Member
Joined: Dec 2000
Posts: 4,567
Likes: 0
From: official euro R hospital, AUSTRIA
injector OHM and resisitor box question
There are peak and hol: 2.5-3 Ohm
The saturated have 12-16 Ohm
But why the hell do my Ohmmeter show 7 Ohm on the RC 320cc and 720cc? I don't get it...used 2 different Ohmmeters to confirm the reading. It read 16 Ohm on the stock 240cc injectors.
Why are people using resisitor boxes...is'nt it possible just to suffer in a resistor in the power line on each injector??
The saturated have 12-16 Ohm
But why the hell do my Ohmmeter show 7 Ohm on the RC 320cc and 720cc? I don't get it...used 2 different Ohmmeters to confirm the reading. It read 16 Ohm on the stock 240cc injectors.
Why are people using resisitor boxes...is'nt it possible just to suffer in a resistor in the power line on each injector??
Honda-Tech Member
Joined: Sep 2001
Posts: 12,978
Likes: 1
From: Reading, PA, usa
Re: injector OHM and resisitor box question (austrian type-R)
i have heard of pople putting in resistors inline with the power .I dont knwo how good it works, or the longevity, but have heard of it being done . I just got the box thouggh.
Honda-Tech Member
Joined: Jun 2001
Posts: 2,763
Likes: 2
From: Dark Aether
Re: injector OHM and resisitor box question (austrian type-R)
I'll call RC Eng today and ask them for you, Christian. I've never seen a peak-n-hold injector with more than ~3 ohms of resistance...but I've never used RC peak-n-hold injectors either. All of the OEM Mitsubishi, Honda, Nissan, and Toyota injectors that are peak-n-hold have always measured 2-3 ohms on my meter.
Sonny
[Modified by Sonny, 9:48 AM 1/13/2003]
Sonny
[Modified by Sonny, 9:48 AM 1/13/2003]
Thread
Thread Starter
Forum
Replies
Last Post
jackiechan
Forced Induction
8
Apr 19, 2007 11:20 AM
