injector OHM and resisitor box question
#1
Member
Thread Starter
Join Date: Dec 2000
Location: official euro R hospital, AUSTRIA
Posts: 4,567
Likes: 0
Received 0 Likes
on
0 Posts
injector OHM and resisitor box question
There are peak and hol: 2.5-3 Ohm
The saturated have 12-16 Ohm
But why the hell do my Ohmmeter show 7 Ohm on the RC 320cc and 720cc? I don't get it...used 2 different Ohmmeters to confirm the reading. It read 16 Ohm on the stock 240cc injectors.
Why are people using resisitor boxes...is'nt it possible just to suffer in a resistor in the power line on each injector??
The saturated have 12-16 Ohm
But why the hell do my Ohmmeter show 7 Ohm on the RC 320cc and 720cc? I don't get it...used 2 different Ohmmeters to confirm the reading. It read 16 Ohm on the stock 240cc injectors.
Why are people using resisitor boxes...is'nt it possible just to suffer in a resistor in the power line on each injector??
#2
Honda-Tech Member
Re: injector OHM and resisitor box question (austrian type-R)
i have heard of pople putting in resistors inline with the power .I dont knwo how good it works, or the longevity, but have heard of it being done . I just got the box thouggh.
#4
Member
Thread Starter
Join Date: Dec 2000
Location: official euro R hospital, AUSTRIA
Posts: 4,567
Likes: 0
Received 0 Likes
on
0 Posts
Re: injector OHM and resisitor box question (austrian type-R)
Tell me, need to know !
[Modified by austrian type-R, 3:42 PM 1/11/2003]
#6
Honda-Tech Member
Re: injector OHM and resisitor box question (austrian type-R)
I'll call RC Eng today and ask them for you, Christian. I've never seen a peak-n-hold injector with more than ~3 ohms of resistance...but I've never used RC peak-n-hold injectors either. All of the OEM Mitsubishi, Honda, Nissan, and Toyota injectors that are peak-n-hold have always measured 2-3 ohms on my meter.
Sonny
[Modified by Sonny, 9:48 AM 1/13/2003]
Sonny
[Modified by Sonny, 9:48 AM 1/13/2003]
Thread
Thread Starter
Forum
Replies
Last Post
jackiechan
Forced Induction
8
04-19-2007 11:20 AM