alright, i searched and just found the same topics over and over, and none of them really helped.

ok, i just want to see some pics of how you guys have mounted your 3 bar map sensors, and what you have done to to get a readig on them. i wasthinking of making some sort of plate with a nipple on each side to replace where the factory one goes, have one go into the hole where the old sensor was with a straight pass thru to the other side where i can attach a vacuum line, or maybe even bore the hole out and rap new holes to screw down onto the factory location

anyways, i would LOVE to see some pics, and hear some good suggestiuons on how to mount it.

 

we usually leave the OEM sensor in place to plug the hole, and run a vaccum line off the intake manifold (or TB, if available) to the sensor, mounted on the firewall usually.

 

i'd still kinda like to see some pics though. ttt

 

Here you go :

 

seems simple enough... thanks.