I'm having problem installing my lc1 wide band...how would I install just to run the 02 sensor reading though my gauge only....not using the datalog to my laptop...there 4 wire from my gauge white,blk,red,yellow...and from the lc1 box there 6 wire blue,red,yellow,black,white,brown....I got it to light up and some what working but dose not read my afr....just blink all time...would I.still need to calabrate it if I just run it with out using the datalog...

 

Yes you must calibrate the sensor according to Innovate's instructions.

 

read the included instructions - and the manual that is on the included cd.

it's really simple.

 

Make sure you have a good ground and keep the unit away from electromagnetic interference.