car is a 93 integra rs with a b18b1 swap 92 gsr trans fully converted to obd1 from all the obd2 stuff well anyways heres my problem... tonight my rear motor mount bolt came out and broke my tps sensor now for a while my harness was not reading a cel for the tps but after it broke the cel came on threw code 7 tps well after i shut the car off and unplugged the tps there was no cel now after this is proceeded to drive home and everything seemed fine i came to a stop light and bam car started to sound like a subie and bogged very hard will not go over 3 k rpm pulled into the local 7 11 checked the §§§§§ cap and everything and it seemed fine got back in and drove it home and it still bogged can anyone point me in the right direction im totally lost here and if its not to much to ask if you guys know what im talking about plez let me know thanks

 

why not change out the tps?