OBD0 D16Z2 stock map with 450 DSM's
Thread Starter
Honda-Tech Member
Joined: Jun 2007
Posts: 103
Likes: 0
From: Zagreb, Croatia
OBD0 D16Z2 stock map with 450 DSM's
Hello, I have many questions, but let's start with just one.
I have a stock PM6 D16Z2 (same as D16A6) map, and I would like just to change my injectors. I have a set of 450 ccm DSM's black top ultrasonicly cleaned. In Turboedit there is an option, just to change the injector sizing from stock to 450 ccm. So, if I just click that button and change injector sizing, in theory, without changing anything else, the engine will work like before but with twice bigger injectors. I'm asking you, is that so in practice? If I just adjust that option about injectors, from stock to 450, will the car run OK?
Please help.
Thanks.
P.S. Or if anybody has a map for a stock engine with 450 DSM's, please let me know, nad save me the trouble
.
I have a stock PM6 D16Z2 (same as D16A6) map, and I would like just to change my injectors. I have a set of 450 ccm DSM's black top ultrasonicly cleaned. In Turboedit there is an option, just to change the injector sizing from stock to 450 ccm. So, if I just click that button and change injector sizing, in theory, without changing anything else, the engine will work like before but with twice bigger injectors. I'm asking you, is that so in practice? If I just adjust that option about injectors, from stock to 450, will the car run OK?
Please help.
Thanks.
P.S. Or if anybody has a map for a stock engine with 450 DSM's, please let me know, nad save me the trouble
.
Last edited by #Leo#; Mar 25, 2009 at 12:01 PM.
Thread
Thread Starter
Forum
Replies
Last Post
