I'm doing a rear brake conversion on my 93 Del Sol S and have got everything I need to put it together but when I went to look at the prop valves I realized mine had about 6 hard lines and the Integra 40/40 only had 4. So did I do something wrong or do I have to modify it somehow?

Here's my valve


And the 40/40 valve( atleast I hope it is)

 

No one can help me with this?? Please I really want to get these brakes on.

 

That is off an abs integra. You need the proportioning valve off of a non abs integra.
The valve will look exactly like yours. You will see 4040 when you get the right one. Your stock valve will have a 3030 for non EX models.

 

Agreed.

You have the wrong valve. I just did this swap today, but the an ITR MC. I just posted it up a few minutes ago.

The 40/40 Proportioning valve looks just like yours, but with 40/40 stamped in it.

 

Dammit, well looks like I need to go back to the junkyard.

 

I bought one here in the Marketplace for $40 shipped.

Post up a WTB, you'll get some replies.

 

If it comes down to that I will but I can probably get it at a local junkyard for $15 lol

 

yeah wrong valve.

also, i've been reading alot latley that you don't even need a 4040

i am in the process of doing this myself...hope you have a rather large pocket book

 

LOL, no I don't have a large wallet..........................just really good friends. Price of my swap was $0 Free. I only had to find a prop valve and instead of just throwing it on there I replaced all the bushings and replaced all the pads and rotor's before swapping. lol

BTW You said you don't need the 40/40 valve? What's are the stock Del Sol valve's proportions?

 

A Del sol S model will have a 3030. You can use it, but when you hit the brakes the rear brakes will lockup on you due to the inproper valving.