95 black civic part out ls/vtec turbo s300 w boost
Thread Starter
Junior Member
Joined: Feb 2005
Posts: 214
Likes: 0
From: Fort Worth, Texas, U.S.
95 black civic part out ls/vtec turbo s300 w boost
--------------------------------------------------------------------------------
1995 Civic coupe black on black.
PLEASE READ:Everything on this list is in great condition. The car ran with almost the listed parts for 2 weeks max and at most 100 miles. Its all in great condition and was used very lightly. The prices i have here are set low enough to get rid of it all ASAP. Serious offers only, no trades period. CALL GABE 817 313 4147
B16a2 head with supertech valve train and GSR cams $500
B16a2 intake manifold with throttle body $100
Ls block with aries pistons and eagle rods 9:1 compression set up for turbo AS IS! $500 pistons and rods are undamaged. block does not hold compression in cyl 2 and 3. i think the block was sleeved incorrectly... $500
SC61 precision turbo,32x12x4 front mount inter cooler, Custom ram horn style exhaust manifold,35mm TIAL wastegate,BLITZ blow off valve,exhaust dumped after front tires, extra piping and hoses $2200
Hondata s300 w built in boost controller on a p28 ecu with laptop $999
880cc precision injectors $200
Walbro 255 fuel pump $80
15" ROTA Group N blk w/red lip Kumho tires like new! $550
Has sport passenger side motor mount, after market driver side mount, stock rear $100
Hasport Shift Linkage! $125
3 bar map sensor $35
Upper front type R strut brace $30
Lower rear fadinza strut brace $30
NEW distributor $100
MSD spark plug wires (5)$40
Alternator (i have 3)$30
Driver and passenger seats in great condition(sold as set only) $200
Back seats $50
Doors w/ glass (no major dents) $150 ea.
Trunk lid w/stock wing $100
Back bumper (light scuff on driver side)$40
Ive also got two more sets of b16a cams for $50 each, and LS cams for $40
Stock b16a1 pistons and rods $50ea 2 sets
Ill scrap this thing down to nothing so let me know if theres something you need that isnt listed here. back glass, side glass, wiring etc.
I can send you pictures of anything you want to see, just CALL ME and let me know
This car has been a very long term project for me. Just after the turbo was installed it dynod' @ 412hp. The cometics head gasket failed on my way home from work and burned cylinders 2 and 3, the block was removed and sent to a machine shop to be sleeved. I guess they didn't know what they were doing because it still dosnt get any compression in cylinder 2 or 3. The car is very clean, EVERYTHING is like new. When it did run, it only ran for 2 weeks and has been sitting here since.
ALL THESE PARTS ARE LIKE NEW, YOU WONT HAVE ANY ISSUES WITH ANYTHING!!! IVE PUT A LOT INTO THIS CAR AND UNFORTUNATELY RUN OUT OF TIME, I just have to move on... CALL GABE 817 313 4147 SERIOUS OFFERS ONLY PLEASE
1995 Civic coupe black on black.
PLEASE READ:Everything on this list is in great condition. The car ran with almost the listed parts for 2 weeks max and at most 100 miles. Its all in great condition and was used very lightly. The prices i have here are set low enough to get rid of it all ASAP. Serious offers only, no trades period. CALL GABE 817 313 4147
B16a2 head with supertech valve train and GSR cams $500
B16a2 intake manifold with throttle body $100
Ls block with aries pistons and eagle rods 9:1 compression set up for turbo AS IS! $500 pistons and rods are undamaged. block does not hold compression in cyl 2 and 3. i think the block was sleeved incorrectly... $500
SC61 precision turbo,32x12x4 front mount inter cooler, Custom ram horn style exhaust manifold,35mm TIAL wastegate,BLITZ blow off valve,exhaust dumped after front tires, extra piping and hoses $2200
Hondata s300 w built in boost controller on a p28 ecu with laptop $999
880cc precision injectors $200
Walbro 255 fuel pump $80
15" ROTA Group N blk w/red lip Kumho tires like new! $550
Has sport passenger side motor mount, after market driver side mount, stock rear $100
Hasport Shift Linkage! $125
3 bar map sensor $35
Upper front type R strut brace $30
Lower rear fadinza strut brace $30
NEW distributor $100
MSD spark plug wires (5)$40
Alternator (i have 3)$30
Driver and passenger seats in great condition(sold as set only) $200
Back seats $50
Doors w/ glass (no major dents) $150 ea.
Trunk lid w/stock wing $100
Back bumper (light scuff on driver side)$40
Ive also got two more sets of b16a cams for $50 each, and LS cams for $40
Stock b16a1 pistons and rods $50ea 2 sets
Ill scrap this thing down to nothing so let me know if theres something you need that isnt listed here. back glass, side glass, wiring etc.
I can send you pictures of anything you want to see, just CALL ME and let me know
This car has been a very long term project for me. Just after the turbo was installed it dynod' @ 412hp. The cometics head gasket failed on my way home from work and burned cylinders 2 and 3, the block was removed and sent to a machine shop to be sleeved. I guess they didn't know what they were doing because it still dosnt get any compression in cylinder 2 or 3. The car is very clean, EVERYTHING is like new. When it did run, it only ran for 2 weeks and has been sitting here since.
ALL THESE PARTS ARE LIKE NEW, YOU WONT HAVE ANY ISSUES WITH ANYTHING!!! IVE PUT A LOT INTO THIS CAR AND UNFORTUNATELY RUN OUT OF TIME, I just have to move on... CALL GABE 817 313 4147 SERIOUS OFFERS ONLY PLEASE
Last edited by samplethree; Dec 9, 2008 at 02:46 PM.
Thread
Thread Starter
Forum
Replies
Last Post