i am running and OBD II LS integra motor swap in a 92 vx. i have a 0bd I integra harness and p75 ecu and i also have converted my injectors..i left the obd 2 manifold and throttle body on. is this a bad combo.. does this work ?

it idles ruff AND dies if i gas it mainly it misses like the dizz is messed up or bad but i have replace d it with 3 different dizz, and ecu./

 

i had that problem and it was the map sensor wired up wrong

make sure the tps and map sensor plugs are not mixed up

 

Am having the same problem. Ill tell you what happen when i fix it.

 

Yeah, my money is on a couple sensor plugs swapped. Very simple and common mistake I've made myself

Check the wire colors on each plug, make sure they are correct ones for that plug

 

I fix my problem it was the ECU, i got the right ecu for my motor.

 

well he said he try 3 ecu

i say its the wiring

 

why did u convert your injectors? obd1/obd2 are all saturated injectors (no resistor box)

http://hondaswap.com/general-tech-ar...jectors-30347/

 

well my problem is back i only worked once. Anyone have a answer to the problem?

 

i switch them and they did nothing

 

how esle can the map sensor be wired up?