ideas, honda s300 vs aem ems
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Oct 2005
Posts: 9,716
Likes: 3
From: 99 probs but a stolen car aint 1, ca, cerritos/fullerton
We had a problem at the dyno today, With a hondata s300 and s100. It would throw cel 9. So we replaced the dizzy with a brand new one. Still the problem came back. I check the wires to the ecu on the dizzy side to the ecu. Everything text fine. Tried it with a aem ems and there was no code and the car runs fine. I know its not the the hondata units because we tried 2 off them and same code. Anyone have this problem? Spark plugs are the right units.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mtber »</TD></TR><TR><TD CLASS="quote">AEM ems won't throw a code if there is a problem....
Hondata is not the problem, the vehicle or ecu is.</TD></TR></TABLE>
Hondata is not the problem, the vehicle or ecu is.</TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post




