Problem with the driver side headlight
i have a 94 honda del sol
my driver side headlight is not working and is currently being tapped into my passenger side to get power
the bulbs were replaced and the wiring harness was also replaced. checked all fuses and still dont know what is going on...
any suggestions, ideas?
my driver side headlight is not working and is currently being tapped into my passenger side to get power
the bulbs were replaced and the wiring harness was also replaced. checked all fuses and still dont know what is going on...
any suggestions, ideas?
Honda-Tech Member
iTrader: (1)
Joined: Oct 2005
Posts: 9,716
Likes: 3
From: 99 probs but a stolen car aint 1, ca, cerritos/fullerton
Could of been that the wire was overloaded and burnt somewere in the harness. I repair this all the time when people hook up cheap bulbs from the swapmeets and try to modd there lighting system. I would not run the driver side off the passanger side unless you want to do the same damage to it. Either fix the problem or use the passanger side to trigger a relay to turn both on.
Honda-Tech Member
iTrader: (1)
Joined: Oct 2005
Posts: 9,716
Likes: 3
From: 99 probs but a stolen car aint 1, ca, cerritos/fullerton
If not do what I mention above. It will not hurt anthing and will make the lights brighter.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wrx-killer-Sti eater »</TD></TR><TR><TD CLASS="quote">use the passanger side to trigger a relay to turn both on. </TD></TR></TABLE>
This is what I'd suggest doing. It's easier than trying to trace the problem, and the results will be better.
This is what I'd suggest doing. It's easier than trying to trace the problem, and the results will be better.
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wrx-killer-Sti eater »</TD></TR><TR><TD CLASS="quote">use the passanger side to trigger a relay to turn both on. </TD></TR></TABLE>
... inexperienced with this... how would i go about doing it?
... inexperienced with this... how would i go about doing it?
Thread
Thread Starter
Forum
Replies
Last Post
jromulo
Audio / Security / Video
2
Jun 24, 2008 04:43 AM




