CEL wont flash
Thread Starter
Joined: Sep 2006
Posts: 12
Likes: 0
From: Sac, Cali
CEL wont flash
99 dx hatch with gsr motor with a jumper harness running a chipped p28, it recently started to redline at like 4100rpm I put a paper clip in the service connector and nothing happens. It used to blink before but now it doesnt do anything but light up. Anyone ever had this problem? is there another way to check a cel?
thanks
thanks
Thread Starter
Joined: Sep 2006
Posts: 12
Likes: 0
From: Sac, Cali
Re: CEL wont flash (EE_Chris)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EE_Chris »</TD></TR><TR><TD CLASS="quote">A solid CEL indicates a bad ECU.</TD></TR></TABLE>
That makes sense because I opened it up to see if it was burnt or wet, it turned out my EPROM chip was slightly unplugged. Thanks
That makes sense because I opened it up to see if it was burnt or wet, it turned out my EPROM chip was slightly unplugged. Thanks
Thread
Thread Starter
Forum
Replies
Last Post
