i have a 10" sub in a bandpass in 98 civic hatch thats coiled all the way down on skunks2 in the back - i was just wondering whats a good way from keeping it from moving when i turn sharp or bumpy roads - lemme know thanxs

 

Bolt it to the floor! If it's a comp car you will get deducted for it otherwise. If you want to take it out for the track, use some kind of quick release

 

You can built some rails with aluminum 90-degree angle pieces from some local volume hardware store. Either build the rails to hold the sub box down or just built a frame around the box so it won't slide around (but can be lifted out with no unscrewing of anything). You can also use some 90-degree brackets.

 

you can just use those 90 degree angle brackets and bolt it down.. you can find those at any hardware store...

 

Thats what I did! Doesn't move around it all.

-Thayne

 

duct tape and some crazy glue should hold that sucker down.

 

haha, epoxy will keep that stuff in place too.

 

i bought some of those things you put in the corners of furniture before you move it. They fit over the corners of the box. i put the brackets down in the back where the box would sit and then screwed them into the floor and the box drops right down into the brackets