I have decided to go FI instead of NA, but I am going to need a little help. My motor will consist of an A6 block and a Z6 head. Now comes the help. Mainly, what are some good pistons and rods that will support a good amount of boost. My goal would be around 300 whp and this is my daily driver. Also, please give me some ways on how to achieve my goal. I would love to know some setups that are currently being used and how much power they are making. Thanks.

 

300 whp and a D Series
Build Block, AT LEAST Pistons and Rods
Weisco and Eagle Setup is PROVEN Over and OVER!
Zex Cam
Tubular Manifold
RC 550's or 750s to be Safe
255 Pump
3 inch downpipe
Intercooler that can support 400whp
2.5 inch IC Piping
Victor X Intake Manifold
64mm TB
T3/T4 of your Choice, a .50 trim should get you there about 16 psi with a good tune, search man alot of people are doing it these days

 

Here's a customers D that I built. Look into his setup

https://honda-tech.com/zerothread?id=1341670
https://honda-tech.com/zerothread?id=1200697

Give us a call if you need any help

 

Thanks for the help guys. I searched and I guess the search server isn't working right because I couldn't find anyting at all. I searched turbo and it said no results. I will keep searching, but keep posting guys.