Hey all, I finally got around to workin on my car again, moved, new job, etc. Here is my delima. Was running a 92 civic radiator but my dp with heat wrap was literally touching the core of the radiator for about 1.5" before it changed directions. Anyway, i have a hole in that radiator (old setup, motor rocked and WG poked it). Then I procceeded to fill the hole with JB weld and it held for about 2 months and then it really decided to leak. It was a temp solution. Here is the deal, I am going to put a new radiator in the car and I am wondering, do you thing that with heat wrap, a 92 civic radiator will still work (with the heatwrap touching the DP turndown off the 4 bolt flange) or should I measure it and have one made that will fit. If so, any brands that would not cost an arm and a leg to have made. Thanks all.