do RC injectors use different seals than stock injectors? I am trying to put them in my gsr and the body seems to be a little bigger so I cant get them into the intake manifold

 

I always thought they were drop in, but if they don't fit try a little WD40 or just grind them out a little bit. I had to grind out my o-rings to get my DSM 450's in.

 

mine were drop in

 

try these

http://www.nopionline.com/nopi...01999

 

are those the orings for the fuel rail end or the seals in the manifold. I am looking for the ones on the manifold end. I bored out the stock ones with a dremel for now, but I'd rather have the corret ones if i can get them.

 

I had the same problem.

All i did was get the rubber o-rings and sand them down to the stock size o-rings.

I just fit the RC injector rubber rings over a pencil and sanded away (alot easier that way).

Worked like a charm.

DAN