stock fuel filter set up is hitting the throttle body and tps sensor and i bent back the bracket and still won't clear the intake pipe. i did a search about people doing inline fuel filter. any body have a DIY on how to do it?

 

you need to unbolt off th firewall and move it next to the battery. It will require you to bend the line a little bit.

it should looks like this

 

thanks, any body using a inline fuel filter?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LD_EGSICK &raquo;</TD></TR><TR><TD CLASS="quote">thanks, any body using a inline fuel filter?</TD></TR></TABLE>

nope, easiest way is just to move the stock one

 

i am using an nline, but i also have upgraded fuel lines as well.

 

if you wanna use inline...go to autozone and get FF504 filter, they're out on the show floor. Will work perfect

 

Im using the stock one and I didnt have to relocate it. (Its real close to the intake though...)

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Cute EK &raquo;</TD></TR><TR><TD CLASS="quote">Im using the stock one and I didnt have to relocate it. (Its real close to the intake though...)</TD></TR></TABLE>

my rubs on my intake as well

 

My only probs with the H22 swap in my EG hatch are-One of my axles keeps coming out of the seal and the speedometer isnt working.

 

what side axel, and what axle did you use?

 

passenger side. i used some cheap abc driveshaft axles, it said they were meant for a h22 in a 92-95 civic! i already had to modify one of them with a 90 integra axle so it wouldnt bind as bad. it still does a little bit around corners though.

 

i'd recommend using the accord midshaft and 90-93 integra axles.. i did that and it went in easy with no problems

 

well i got it too work better by replacing the outer half with a 90 integra axle.

 

Here is a pic of how my buddy did it on his eg with a stock filter and on my eg with a inline filter. I also used the inline filter on my ek but I do not have any pics of it.

 

yes unbolt it thats what mine looks like...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DxTrix &raquo;</TD></TR><TR><TD CLASS="quote">Here is a pic of how my buddy did it on his eg with a stock filter and on my eg with a inline filter. I also used the inline filter on my ek but I do not have any pics of it.


</TD></TR></TABLE>

SEXY cars!!! i too had an inline fuel pump with all steel-braided lines.

 

what is the stock fuel psi on the jdm h22?