fuel pressure with JRSC
Thread Starter
Honda-Tech Member
Joined: Aug 2003
Posts: 2,725
Likes: 0
From: in the streets
fuel pressure with JRSC
where should my fuel pressure be at idle with a jrsc @ 6psi?
i also have head work done, i was thinking 50 psi at idle
i have a walbro 255lph fuel pump also
i also have head work done, i was thinking 50 psi at idle
i have a walbro 255lph fuel pump also
Joined: May 2005
Posts: 1,789
Likes: 1
From: Simi Valley, CA, USA
Re: fuel pressure with JRSC (hondaeg8)
If you are running lean, fooling with your fuel pressure isn't going to solve your problem. You need to adjust your injector duty cycle. Oh wait, you aren't using an FMU are you...
Thread Starter
Honda-Tech Member
Joined: Aug 2003
Posts: 2,725
Likes: 0
From: in the streets
Re: fuel pressure with JRSC (EnzoSpeed)
for right now.. yeah.. fmu with stock injectors. i have some 310cc injectors, but not using them.
i just put the kit on , so i used everything it came with ecept the injectors.
i just put the kit on , so i used everything it came with ecept the injectors.
Thread
Thread Starter
Forum
Replies
Last Post
the.hamburglar
Forced Induction
16
Mar 27, 2015 07:58 AM