I recieved a MAP sensor that I purchased off of ebay today. The thing is that it is not the same MAP that is already on the motor, nor does it fit. If I took the bracket off, and cut the plastic under it, I am sure it would fit. Could I use this if I got it to fit? The connections from the wiring do fit, it just does not fit into the throttle body without modification. Thanks

 

Well, it works. I threw a couple CEL's at first, but took it for another drive and beat on it and didn't throw one. So who knows. I would still like to know what car this came off of? Thanks

 

looks like a obd0 map..probbly a jdm B16.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B16 delSlow &raquo;</TD></TR><TR><TD CLASS="quote">looks like a obd0 map..probbly a jdm B16.</TD></TR></TABLE>

i think so too. my friend gave me his map sensor off a jdm b16 and it look like that. the one i had had two screws holding it down, this one has one. but im not sure

 

haha i was going to bid on that map sensor on ebay the other day haha...but if the plug fits it should be fine?

 

Its from a 92-95 Civic. Thats one thats on the firewall. For some reason they made both in that year. Should work the same however.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM_Ej &raquo;</TD></TR><TR><TD CLASS="quote">Its from a 92-95 Civic. Thats one thats on the firewall. For some reason they made both in that year. Should work the same however.</TD></TR></TABLE>

hmm thats weird. anyway, yea my car is just running lean now, and seems to bog a little bit at idle, but beats the hell out of what it used to do with the old MAP. Oh well. Yes the plug does fit.

thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ej1_coupe &raquo;</TD></TR><TR><TD CLASS="quote">

hmm thats weird. anyway, yea my car is just running lean now, and seems to bog a little bit at idle, but beats the hell out of what it used to do with the old MAP. Oh well. Yes the plug does fit.

thanks</TD></TR></TABLE>

u dont wanna run lean for too long. u may have detonation and ur motor go boom! i would rather run rich then run lean.

 

90-93 Integra had the MAP mounted on the firewall. Vacuum source was routed behind intake manifold to the throttle body.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98B00STED &raquo;</TD></TR><TR><TD CLASS="quote">

u dont wanna run lean for too long. u may have detonation and ur motor go boom! i would rather run rich then run lean.</TD></TR></TABLE>

hmm thinks if that might be the way to go and have an excuse for an engine swap..haha. Anyway, thanks for the info.