Misfire CEL 74 Help!!!!
Ok im getting a misfire cel 74. My car drive and ifles normal. I have no idea what is causing this cel. I have changed distributor cap and switched to another working dirstirbutor. I have changed new spark plugs and new spark plug wires.
I swapped around the injectors and still i get this CEL!!! When im using the obd1 ecu, i get no cel. Its only when i run the obd2 ecu.
Oh yeah, all this happened after i was boosted and when back to stock. When i went back to stock, i used my old obd2 p72 and thats when i got the cel.
Someone help me out, i want to resolve this issue so i can boost again and get tuned..
I swapped around the injectors and still i get this CEL!!! When im using the obd1 ecu, i get no cel. Its only when i run the obd2 ecu.
Oh yeah, all this happened after i was boosted and when back to stock. When i went back to stock, i used my old obd2 p72 and thats when i got the cel.
Someone help me out, i want to resolve this issue so i can boost again and get tuned..
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 200cs »</TD></TR><TR><TD CLASS="quote">my itr had this problem before boost. It was the factory coil. I replaced it with a Jacobs set-up and it works fine. Good luck
</TD></TR></TABLE>
Thanks for the response
</TD></TR></TABLE>Thanks for the response
Thread
Thread Starter
Forum
Replies
Last Post
BLacK FirE
Acura Integra
19
Jul 13, 2006 01:56 PM




