TurboSX RFL Instructions?
Thread Starter
Junior Member
Joined: Jun 2004
Posts: 284
Likes: 0
From: twin cities, mn, usa
TurboXS RFL Instructions?
i just recently bought a RFL from a HT member. it has everything in it, but i cant seem to put it together. is there a page or instruction online where it shows how to put it together? also, where can i find a adaptor plate?
Member
Joined: Feb 2003
Posts: 1,003
Likes: 0
From: bay area
Re: TurboXS RFL Instructions? (tig3rxiong)
it should have came with two little pipes that screw into the rfl, and are welded into the charge pipe. if not, then while your at the hardware store buying your 1.25" holesaw, pick up some 1.25" OD pipe as well. i'd be pissed if i bought something and it didn't come with everything that it's supposed to.
Member
Joined: Nov 2003
Posts: 2,325
Likes: 0
From: Nowhere, in, Canada
the washers let you adjust the sound and all ... unscrew the top of the bov, put in the washers and screw it back on... i did not need to use the washers on mine...worked and sounded good at 7psi 
Thread Starter
Junior Member
Joined: Jun 2004
Posts: 284
Likes: 0
From: twin cities, mn, usa
well, i kinda get the picture above but mine comes with 4 adaptor pipe and i dont know which one it is. if someone has the time to picture of their RFL it would be a big help for me. thanks.
Trending Topics
Honda-Tech Member
Joined: May 2003
Posts: 5,735
Likes: 0
From: Portland, Oregon
Re: (tig3rxiong)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tig3rxiong »</TD></TR><TR><TD CLASS="quote">well, i kinda get the picture above but mine comes with 4 adaptor pipe and i dont know which one it is. if someone has the time to picture of their RFL it would be a big help for me. thanks.</TD></TR></TABLE>
I'm not quite sure what your question is... it came with 4 pipes? Just pick the one made out of the same material as your charge pipe and weld it on there...
What do you want a picture of? I have pics but I don't think they will help...
I'm not quite sure what your question is... it came with 4 pipes? Just pick the one made out of the same material as your charge pipe and weld it on there...
What do you want a picture of? I have pics but I don't think they will help...
Member
Joined: Feb 2003
Posts: 1,003
Likes: 0
From: bay area
Re: (B18 CYA)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18 CYA »</TD></TR><TR><TD CLASS="quote">the washers let you adjust the sound and all ... unscrew the top of the bov, put in the washers and screw it back on... i did not need to use the washers on mine...worked and sounded good at 7psi </TD></TR></TABLE>
err... that, or they also add spring tension to keep it closed for higher boost. they say it's good to 25psi, but i'm sure it's only if you add washers.
</TD></TR></TABLE>err... that, or they also add spring tension to keep it closed for higher boost. they say it's good to 25psi, but i'm sure it's only if you add washers.
Re: (B18 CYA)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18 CYA »</TD></TR><TR><TD CLASS="quote">the washers let you adjust the sound and all ... unscrew the top of the bov, put in the washers and screw it back on... i did not need to use the washers on mine...worked and sounded good at 7psi </TD></TR></TABLE>
They are also need for high boost, they add some tension to the spring so i dosen't open up under boost.I had that problem with mine at 10 psi, it would start to open and cause me to have no boost, so I added three washers and then I was good
</TD></TR></TABLE>They are also need for high boost, they add some tension to the spring so i dosen't open up under boost.I had that problem with mine at 10 psi, it would start to open and cause me to have no boost, so I added three washers and then I was good
Thread
Thread Starter
Forum
Replies
Last Post